KALYSO – KALYSO HY – KALYSO NV manual
14
Switching from speed/mileage mode:
Press the
ON
button briefly to switch from speed mode =>
AVG Speed => Max Speed then to Trip => ODO => Time mode.
Speed information:
Pressing the
ON
button changes the speed mode.
Night mode:
Pressing and holding the
+
button for 1 second activates the display’s backlight.
Headlight/backlight:
Press and hold the
+
button to switch the lights on and off.
To reset:
Select the mode to be reset (AVG Speed/Max speed/Trip or Time), then press and hold the
+
and
-
buttons simultaneously to reset to zero.
3.5
Electric assistance:
3.5.1 Operation:
Your bicycle is an electrically-assisted one: it is equipped with an electric motor, which is located on the rear
wheel. This motor starts automatically (if the ignition is on and the battery is charged) when and only when
you are pedalling (with the exception of the 6 km/h button).
Power assistance is initiated by an electromagnetic detector, which cuts off the motor's power supply as soon
as you stop pedalling.
The motor also stops:
•
When you have reached the speed limit of 25 km/h.
This principle enables the motor to give you its full power when you need it and to save battery power when
you are descending or on flat ground.
This type of energy management gives you a longer battery life per charge. These functions and the energy
management are carried out by an electronic control unit or “controller”.
W
E WOULD LIKE YOU TO NOTE THAT ACTIVATION OR DEACTIVATION OF POWER ASSISTANCE MAY LEAD TO
ABRUPT ACCELERATION OR DECELERATION
.