BRICKS Manual
7
2.5
Adjusting the suspension:
2.5.1
Air pressure and SAG*:
-Undo the valve cap: Screw a fork / shock-absorber pump onto the valve.
-Pump the suspension fork / shock absorber to the desired pressure.
(see table below).
NEVER EXCEED THE RECOMMENDED AIR PRESSURE.
-Sit on the bike in the normal position and check the “SAG”. Inflate or deflate as required. To evaluate the
“SAG” correctly, attach a cable clamp onto the stanchion. You can lean against a wall in order to sit on the
bike without moving and take the measurement.
* (negative spring) corresponds to the compression caused solely by the bodyweight and position of the cyclist.
Front suspension :
Rear suspension:
