BRICKS Manual
10
2.6.2
Rear wheel:
Dismounting the rear wheel:
Mounting the rear wheel:
Checking the wheel alignment:
-
Centre the wheel in relation to the frame.
-
Check the centring and positioning in line with the front wheel, as well as the positioning of the chain.
Checking the brake adjustment:
-
Operate the brake handle 3-4 times. This allows the pads to settle correctly.
-
Check that the brake disc is properly centred and rotates without friction.
-
Finally, check that the wheel brakes are working properly.
CHECK THAT THE CLAMPING NUTS ARE FULLY TIGHTENED
.
2.7
Installing the pedals:
The pedals can be installed and removed using a 15-mm open-ended spanner.
THEY ARE NOT IDENTICAL.
- Open the lever
- Unscrew in an anti-clockwise direction
- Remove the axle
- Take off the derailleur
- Tap the top of the tyre to release the
wheel
Repeat the operations above in reverse
order.
There is a mark on the axle that differentiates
them:
R
= Right (tighten in a clockwise direction)
L
= Left (tighten in an anti-clockwise direction)
