Neomatica LLC, Bluetooth sensor ADM35, ADM35H, version 1.1 dd 02.07.2021
13
4.2.4 Firmware update of the sensor
•
Wait until the sensor is detected
•
To switch to the
«Control» menu click the icon
.
•
Click on
«Firmware update»
•
If the sensor firmware version is less than the version of the current firmware available on
the update server, the message
«Update available» will be displayed indicating the current
version.
•
To start the update process, click
«update».
To check the relevance of the firmware version and download it from the update server, the
application needs Internet access. At the same time, traffic may be consumed or a fee for
communication services may be charged by your mobile network operator. The
«ADM-BLE
Configurator
» application does not support a permanent connection via the Internet.
Synchronization of firmware versions is performed no more than once a day. The sensor
firmware has a size of not more than 100 kB.
4.3 Using the sensor together with the trackers
АDM007 and ADM333, that
contains BLE interface
4.3.1 Method of sensors catching
The sensor is catched on the tracker side. By default, the sensor is configured to measure
temperature, humidity and illumination.
Sensor integration with the tracker ADM007 or ADM333, that contains BLE (hereinafter
referred to as a tracker) is performed via sending commands via GPRS or SMS. It is also possible
to configure the sensor in the graphical interface of the
«ADM Configurator» application using the
Bluetooth interface. Up to 5 sensors of ADM35(H) can be connected to one tracker. One sensor
can be connected to several trackers simultaneously
Catching the sensor can be performed manually and automatically.
Manual catching requires entering addresses of each sensor. This method is suitable for
the situation when in the Bluetooth coverage range of the tracker there are activated sensors,
which should not be caught by the tracker.
Automatic catching is based on searching for the sensors and automatic record of
addresses of all sensors found. This method is suitable for the situation when in the tracker
coverage Bluetooth range there are only needed sensors.
Содержание ADM35
Страница 1: ......
