Neomatica LLC, Bluetooth sensor ADM35, ADM35H, version 1.1 dd 02.07.2021
10
4.2.1 View of the readings in
«ADM BLE-Configurator» application
•
Launch
«ADM BLE-Configurator» application.
•
Make sure that the application has been given all the necessary permissions.
For correct operation, you need not only to permit the use of the
«Geolocation» or
«Location», but also to enable this function if it is disabled.
•
The sensor will be found as soon as it sends another message with readings.
The
following
parameters are available for
viewing:
•
Sensor model;
•
Sensor MAC-address;
•
Temperature;
•
Illumination;
•
Humidity
(only
for
ADM35H);
•
Hall element;
•
Battery voltage;
•
Firmware version;
•
RSSI
–level of received radio signal;
•
The time passed since the last data message was received;
•
LR-data received by Bluetooth Long Range technology
•
Archive status.
This section presents the most complete set of data. It may differ depending on the firmware
version of the sensor, as well as on its modification.
4.2.2 Sensor setting in
«ADM BLE-Configurator» application
To view or change the sensor settings, wait until it is detected and click on the
icon to
go to the
«Control» menu.
Description of the parameters in
«Control» menu:
•
Archive.
•
When the
«Archive» option is active, readings are recorded at a set frequency. The
readings of all active sensors are recorded in the archive with reference to time.
Содержание ADM35
Страница 1: ......
