Neolysis NEO-12, Руководство по установке и обслуживанию

Страница: 38 / 40

36
11. WARRANTY CONDITIONS:____________________________________________________________________
11.1. GENERAL ASPECTS
According to these provisions, the seller guarantees that the guaranteed product is in perfect condition upon delivery.
11.1.1. Total Warranty Period is 3 YEARS, except for the following components:
a. LAMP: 13.000 hours or 1.000 ignitions.
b. ELECTRONIC BALLAST: 2 YEARS.
c. PH/ORP SENSORS: 6 MONTHS.
d. ELECTRODES (Electrolysis): 2 YEARS ( or 4.000 hours), not extendable.
11.1.2. The Warranty period will be calculated as of delivery to the purchaser.
11.1.3. Should the Product be faulty and the seller is notified during the Guarantee Period, he shall repair or replace the Product at his own cost
wherever he sees fit, unless this is either impossible or out of proportion.
11.1.4. When the Product cannot be repaired or replaced, the buyer may request a proportional price reduction or, if the fault is important enough,
rescission of the sales contract.
11.1.5. Parts replaced or repaired pursuant to this warranty shall not extend the warranty period of the original Product, although they shall have
their own warranty.
11.1.6. For this warranty to be effective, the buyer shall accredit the date of acquisition and delivery of the Product.
11.1.7. When the buyer alleges a fault in the product over six months after its delivery, he shall accredit the original and existence of the alleged
fault.
This Warranty Certificate does not limit or prejudge consumer rights pursuant to national legislation.
11.2. SPECIFIC CONDITIONS
11.2.0. For this warranty to be effective, the buyer must closely follow the manufacturer’s instructions included in the documentation supplied with
the product, as applicable to each product range and model.
11.2.1. Whenever a schedule is defined for the replacement, maintenance or cleaning of certain product parts or components, the warranty shall
only be valid when said schedule has been correctly followed.
11.3. LIMITATIONS
11.3.1. This warranty shall only be applicable to sales to consumers, with consumer being defined as a person who purchases the product for other
than professional purposes.
11.3.2. No warranty is applicable to normal wear or the product, parts, components and/or fungible or consumable materials (except the electrode).
11.3.3. The warranty does not cover cases in which the product: (i) has been incorrectly treated; (ii) has been inspected, repaired, maintained or
handled by an unauthorised person; (iii) has been repaired or maintained with non-original parts, or (iv) has been incorrectly installed or started up.
11.3.4. When a faulty product results from incorrect installation or start-up, this warranty shall only be applicable when the installation or start-up
forms part of the product contract of sale and had been performed by the seller or under the seller’s responsibility.
11.3.5. Damage or faults due to any of the following causes:
o
Operation at a pH of more than 7.6.
o
Use of explicitly unauthorised chemicals.
o
Exposure to corrosive environments and/or temperatures of less than 2
o
C (36
o
F) or more than 40
o
C (104
o
F).
o
Bad programming of the system and/or user inadequate calibration of the pH/ORP sensors.
o
Operation at salinity values of less than 0.5gr/L of sodium chloride and/or temperatures lower than 15
o
C (59
o
F) or higher than 40
o
C
(104
o
F).