Neolt Neofold 1250 S, Руководство пользователя

Страница: 81 / 102

USER MANUAL
USE
6
NEOFOLD S
VERSION:
NLF_PB-S-2015-1S-GB
30
Qualifications of the operator 6.1
The machine must be used by qualified personnel only
Place of work 6.1.1
Position of the operator: during the start up and folding operations in front of the machine
with the control panel on his left; during maintenance operations the position depends on
the specific operation to be carried out.
Switching the machine on and off 6.1.2
Position of the operator: during the start up and folding operations in front of the machine
with the control panel on his left; during maintenance operations the position depends on
the specific operation to be carried out.
Feeding of the sheet to fold 6.1.3
In order to get the data table of the drawing on the fist fold, the sheet must be fed face
down and with the table at the entrance of the feeding surface (also for cross fold).
Follow the steps below to begin the process, Picture,
Fig. 6.1 / 6.2 .:

Select the size of the folding desired on the keyboard
A
(see Chap. 4).

For the 920/S, Position the paper on the feeding surface and push it towards the
rollers
B
, the left edge of the paper must be aligned with the proper feeding guide
C
,
so that the photocell
D
detects the paper. This step will avoid any rippling effect on
the width of the paper itself.


For the1250/S, Position the paper on the feeding surface and push it towards the
rollers
L
, the left edge of the paper must be aligned with the proper feeding guide
I
,
regolata in precedenza in funzione del formato del foglio da piegare, seguendo la
serigrafia sul piano di lavoro. So that the photocell
H
detects the paper. This step will
avoid any rippling effect on the width of the paper itself .

Push the sheet forward until the rollers catch the paper to be folded.

It is highly recommended not to lean against or put any object on the feeding surface. If
any clothes or pieces of jewellery get caught in the machine press the emergency button.