Playback/Deletion
Playback
Go to the View Files menu when in standby mode and select one of the available
folders to view the files: Event (for emergency recording), Video (for normal
recording) or Photo.
Deletion
Press the ON/OFF button while viewing a list of files in one of the 3 folders. The
following options will appear:
Delete files
. When entering this menu item, the user
can delete all files or only the file that was selected when the ON/OFF button was
pressed.
Lock
(for the Video folder). When entering this menu item, the user can lock the
current file, i.e. make it unrecordable. In this case, such a file will be moved to the
Event folder.
Select the file to view using Up/Down and
press the Confirm (OK) button to start playback. Click the OK button again to
pause the playback.
Press the Right button to speed up the playback (x1, x2, x4, x8).
For example, if the Loop recording setting is set to 1 minute, then when the
G-sensor is triggered, the 30-second video is recorded into the Event folder and
the next 30 seconds of the recording are stored in the VIDEO folder. In this case, if
the G-sensor re-triggers at 25 seconds, a file with a length of 55 seconds (30
s 25 seconds) will be recorded into the VIDEO folder. If the triggering
occurs at 45 seconds,
then 2 files will be recorded in the VIDEO folder: 60-seconds (since the loop
recording is set for 1 minute) and another 15-seconds video.
If the Loop recording settings are set to 3 or 5 minutes long, then the first video in
the Event folder will be 75 seconds instead of 30 seconds.
14
