background image

1. Operating Conditions

• Please read the warranty terms carefully. 
• Never insert or remove a memory card while the DVR is on. It may cause 
damage to the device and recorded video files.
• Use only high-quality microSD cards of at least Class 10 providing for the UHS-I 
communication to avoid recording failures and playback delays.
• It is recommended to use 8GB to 128GB memory cards.
• This device shall only be used with the accessories supplied. Where third-party 
accessories are used, Neoline bears no responsibility for any damage to the 
product.
• Do not expose the product to fire, moisture or chemicals (gasoline, solvent, 
reagents, etc.).
• Do not disassemble or modify the product.
• Neoline is not responsible for any data loss and/or direct or indirect damage 
caused to the user or a third party by incorrect use of the device or software, their 
incorrect installation, or the use of accessories not included in the package.

• Format the microSD card at least once every two months to avoid damage to its 
file system.
• Observe the storage and operation temperature conditions (see specifications). 
Do not expose the unit to sunlight for too long.
• The device is designed to be used in cars with a transparent windshield or 
light-tone heat shield for glass. Where the windshield is tinted or covered with dark 
heat shield film, the video quality decreases.
• The 3M Adhesive Tape holder is designed for permanent installation. So, please 
determine the location of the video recorder in advance.
• Install the DVR in such a way as to get the maximum field of view. DO NOT place

CAUTION! 

Inserting a brand-new SD card may sometimes bring no DVR 

response. In this case, just format the memory card with a PC. 

3

Содержание G-TECH X81


















Отзывы: