P o w e r O n t h e S y s t e m
C l e a n T h e S y s t e m
To disconnect device, slide the
jacket away from controller
Press ‘+’ button once to
begin treatment. Use ‘+’
and ‘-’ buttons to increase
or decrease light intensity.
Press and hold power
button to
START
device. System notifies
once self-check
completed*.
Press and hold power button
to turn off. Always turn
off and disconnect device
from power outlet during
cleaning.
Remove CloudCover.
Do
not remove GelMat during
cleaning.
Wipe down GelMat and
exposed edges of Light Bed
with disinfectant wipes.
Allow surface to dry.
Remove any remaining
chemical residue using
clean damp cloth.
Allow surface to dry***.
NEOLIGHT SKYLIFE
PHOTOTHERAPY VERSION 1.0
*Actual display may vary based on software version.
** LED lifetime refers to the number of hours the LED modules
have been used to date.
LED LIFETIME
2,435 HRS
System will display LED
lifetime**. Verify that
time is less than
25,000 hrs.
Pause treatment
, press
power button once.
Resume treatment,
press power button
once again.
*** See User Manual for Full Instructions, Warnings, Precautions,
Contraindications, and Cleaning Instructions
User Manual: Access full instructions by
scanning this code or go to
theneolight.com
support page here:
https://bit.ly/3eTsky
Learn more at theneolight.com
NeoLight LLC
1465 N. Scottsdale Rd. Suite 100
Scottsdale AZ 85257
MKT-002 Rev. D
©2020 NeoLight, LLC. All Rights Reserved
Maximized Spectral Power for
Optimized Phototherapy
I n t e r m i t t e n t T h e r a p y
P o w e r O n
P o w e r O f f
R e m o v e C o v e r
D i s i n f e c t S y s t e m
F i n i s h C l e a n i n g
S y s t e m H o u r s
L i g h t I n t e n s i t y
