10
♦File generation Wizard
(Note: due to the great difference in complexity of each product, the temperature
parameters generated are only used as reference. In order to achieve the best solder
effect, it is necessary to measure the temperature curve and improve the parameters
after comparing with the temperature curve provided by the solder paste manufacturer.)
Step 1: select the type of solder paste to solder the product. If the model is not found in
the list, please go to search in the appendix, or ask the solder paste manufacturer about
the melting point, and then select the option with the closest melting point.
Step 2: select the material and thickness of PCB to be soldered.
After selection, the system will automatically generate the corresponding soldering
formula.
Содержание IN12
Страница 6: ...5 3 Main Parts 3 1 Reflow Oven Main Body 3 2 Operating Panel...
Страница 7: ...6 3 3 Cover and Heating Zone 3 31 Heating Zone...
Страница 18: ...17 Figure 4 Set too high low temperature of active zone Figure 5 Soldering too much little...
Страница 24: ...23 Regularly add high temperature lubricating oil to transfer chain bearings...
