NeoDen IN12, Руководство пользователя

Страница: 9 / 24

8
4.3 Status of Indicators
There’s tri-color light on top of the cover, it is used to indicate whether all zones’
temperature have reached the well-set temperature. When all temperature reach
to well-set temperature, indicator light up green; While in the heating-up status,
indicator will flash as yellow; Only when the temperature zone is closed (without
flash) or in any faulty (in flash status), it will show as red .
4.4 Operation instructions
♦ Power on
Switch the button to ON status, machine start up. Please check the emergency button,
air switch and RCD before power on the machine.
♦ Chain mesh speed setting
Click the speed parameter,a blank parameter dialog will pop out, type into the
temperature you need set. Generally suggestion 250-300mm/min (Remarks:
temperature will also be influenced once chain speed changed, please re- test the
temperature curve and adjust temperature according to the test result)
♦ Temperature setting
As above picture showed, data on upper side is well-set temperature from zone1 to
zone6; data in the middle is the real-time temperature. Click the temperature parameter
dialog, directly type into the set temperature, the heating zone will start heating and
keep it in a stable situation while temperature reached.
Setting Transport
speed setting
Set temperature
Real-time temperature
Real-time status
Real-time power
Power on/ off
Emergency
Zone power on/ off