P. 7
- Neo Elipsoled 3100 MKII
SETTING
this menu allows the user to adjust key
operation settings for this fixture.
KEY
select
ON
for automatic lock-out. Password to re-enter the
display is
UP + DOWN + UP + DOWN
.
Select
[DIM1]
,
[DIM2]
,
[DIM3]
or
[DIM4]
for different
dimming speeds ([DIM4] is the slowest dimming
speed).
CURVE
allows the user to adjust the shape of the
dmming curve. See the
CURV
chart to understand
more about actual dimming curves.
PERFORM
this setting allows the user to select the
performance characteristics of the fixture.
LIVE
mode is the default mode which balances the
requirements of output and noise.
STUDIO
mode maintains extremely low noise at all
times and operates at a moderated power level.
POWER
mode operates at high power for long peri-
ods of time without considerations for noise level.
SLOCK
is use to lock settings menu. When
SLCK
is set to ON the user must insert passcode (
UP +
DOWN + UP + DOWN
) in order to access the settings
English version
menu.
PERSONALITY
this settings allows the user to select
DMX
personality of the fixture. Refer to
DMX
per-
sonality charts for specific details.
DMX ERROR
Choose
SAVE
in order to save the last
DMX
data incase of DMX signal error. Choose
BACK
in order to blackout in case of DMX signal error.
In order to reset custom modes to default values
select
RESET
.
MODE
SETTING
this function allows the user to se-
lect whether the fixture will send DMX data to other
fixtures during stand-alone operation. The
MAST
setting allows data to be sent to other fixtures. The
SELF
setting is default and will not send DMX data
to other fixtures.
PWM_RATE
is PWM reflesh rate bottom, press
UP/
DOWN
to choose 600Hz, 1200Hz, 2000Hz, 4000Hz,
25000Hz.
NOTE
with reflesh rate increase, gray rate dimmer
will be reduced (that´s means high reflesh rate, low
gray rate), when it´s 4000Hz, CV3 is invalid, when
it´s 25000Hz, CV1 CV2 CV3 are invalid, so please
lower PWM rate to increase gray rate in necessary.
CURV
DIMMING
