NEO TOOLS 90-102, Руководство пользователя

Страница: 8 / 55

3. The device will retain the temperature setting by switching itself on and off automatically.
4. To adjust the temperature using the remote control, first press the TEMP button and then use the + or - buttons to adjust the
temperature setting.
Timer:
Shortly pressing the M button on the heating panel will activate the timer. You can set the time after which the heating panel will turn off by
pressing the + or - buttons. With each button press 1 hour will be added or subtracted. After five flashes the time will be set. The number of hours
and the temperature will be displayed alternately. The heating panel will turn off after the set number of hours.
To set the timer function using the remote control, first press the clock button below the + button. and then by pressing the + or - buttons adjust
the temperature setting.
Operating the weekly programmer with the remote control.
The heater can also be controlled by the remote control. Please refer
to the layout on the right
1. Press to switch on/off the heater.
2. Press , and then you can set timer by and .
3. Press and then you can set temperature by and
.
Week timer control area
Week timer setting:
Before set the week timer, you have to set the current time which you can get from your watch/phone, etc. Below shows how to set the current
time:
Press to set current time, the display will start to show 00 and flashing, press or to set day in one week, 1 means Monday, 2 means
Tuesday.....7 means Sunday, press to finish the day setting, the display shows again 00 and flashing, press or to set hour, from 0
to 23, press to finish the hour setting, the display shows again 00 and flashing, press or to set minute, from 0 to 59, press to
finish minute setting, the display stop flashing and show back the room temperature.
After the current time setting, you can now start the week timer setting
1. Press button and the display will start to show 00 and flashing, press again , the display shows 1 means Monday, press
again and shows 2 means Tuesday, by this way you can set from Monday to Sunday. Press to finish day setting, and the
display shows back 00 and flashing.
2. Press to set the program in one day, the display shows 1 means program 1, and press again to set the program 2, it’s available
for 4 programs in one day. Press to finish program selecting, and the display shows back 00 and flashing.
3. Press to set the time you want to switch on the heater, press once shows 1 means one o’clock, press again shows 2 means
two o’clock, and you can set up to 24. Press to finish setting, and the display shows back 00 and flashing.
4. Press to set the time you want to switch off the heater, press once shows 1 means one o’clock, press again shows 2 means
two o’clock, and you can set up to 24. Press to finish setting, and the display shows back 00 and flashing.
After the above operations, you have finished the 1 timer setting successfully, and you can set the second timer by repeating the above
operations. After you finished all the timer settings, press to finish and quite the week timer setting.
Note:
1. To finish one time group, you have to set --- --- --- in sequence, during week timer setting, all other buttons are
invalid, except and buttons.
2. During the week timer setting, you can finish by press button, the timer group will be stored if full steps is finished, or else it
won’t be stored.
TROUBLESHOOTING
If your heater fails to operate, please follow these instructions:

Ensure that your circuit breaker or fuse is working properly.

Be sure the heater is plugged in and that the electrical outlet is working properly.

If the ON/OFF switch is not illuminated at ON position, send it to service center for reparation directly.