NEO TOOLS 11-730, Инструкция по эксплуатации

Страница: 8 / 56

neo-tools.com
8
ORIGINAL MANUAL (INSTRUCTION)
HYDRAULIC JACK 11-730, 11-731
CAUTION: READ THIS MANUAL CAREFULLY BEFORE USING THE TOOL AND KEEP IT FOR FUTURE REFERENCE.
This manual contains collection of necessary information, warnings, instructions, operation description, and maintenance with
handling procedures. It is recommended to keep the manual together with warranty or invoice issued at the time of purchase.
CAUTION: The jack is designed to operate indoors.
The design is assumed to be safe, protection measures and additional safety systems are used, nevertheless there is always a
small risk of injuries at work.
Do not use this tool in explosive atmosphere.
There is a risk of injuries if you keep hands close to the jack support point, especially when lowering or lifting a load.
Do not put your hands close to the support during operation.
If the jack gets damaged, lifted load may fall down in uncontrolled manner, posing a risk to people.
Make sure the jack is properly set.
Make sure that lifted load is smaller than maximum capacity of the jack.
dents.
Pay attention to conditions in the workplace.
Do not expose the jack to humidity.
Protect the workplace against bystanders, especially children.
Pay attention and keep children and bystanders away from the work area.
Stay focused when working with the jack. Distraction may cause loss of control over the jack operation.
Store unused jack beyond reach of children.
Do not make the jack accessible to persons who are unfamiliar with it or those who have not read this manual. The jack may
be dangerous in hands of untrained users.
Do not use the jack for purposes it is not designed for.
Use personal protection measures, protective glasses and protective gloves. Use of personal protection measures, such as
anti-slip shoes, hard helmet, hearing protection (depending on the tool being used), reduces risk of injuries.
When operating the jack be foreseeing and be careful when performing any task.
ting the jack may cause serious personal injury.
Before operation check technical condition of the jack, joined items and look for visible cracks. Do not use the jack with
improper hydraulic pump operation.
Warning: The jack is designed only for lifting. Surface the jack is placed on should be even, hard and level. Before starting to
lift a vehicle block its wheels with wedges and apply parking brake. Working under a vehicle or any other object that rests on
the jack is prohibited. It is necessary to secure lifted object (vehicle) with additional stationary supports that can safely support
whole weight of the object. Ensure the jack is in good technical condition before starting to lift. Do not make any adjustments
to safety valve.
HYDRAULIC JACK ITEMS
Support 1.
Support lever 2.
Lever lock 3.
Release valve 4.
Safety valve (present only in certain jack models) 5.
Lever socket 6.
7.
Pin lubrication socket (present only in certain jack models) 8.
CAUTION! Do not start working under vehicle rested on the jack.
Do not disassemble the jack, it may cause improper operation or damage and result in risk for your health or life.