12. Maintenance
Always turn off the projector after use, gently remove the plug and let the projector cool down
before moving or storing it.
The lens should only be cleaned with a soft cloth, making sure that the fans remain dust-free.
Use a soft tissue or lens cloth with a little spirit or pure alcohol to clean
the lens.
Do not try to open the projector yourself and never touch the LED module
–
it may break! In case of
problems, take the projector to a qualified mechanic (Nenko can advise you on this)
To replace the fuse, turn off the device and let it cool sufficiently. Then you can replace the fuse with
a fuse with the same specifications: t1AH/250V Ceramic 20 mm x 5mm diameter) The fuse can be
found in the IEC panel on the back. Remove the fuseholderusing a flat screwdriver. Replace the
fuseholderand press until it no longerprotrudes. If the fusebreaks immediately, contact Nenko, do
not use a fuse with higher values.
For more information, please visit our website
com
visits.
