background image

 

 

 

If you want to hang theprojector, we advise  you to use mounting set ST1SI  (to be ordered 
separately). 
 
Secure the projector using a safety cable or chain attached to a fixed object. 
 

8. Additional information 

This product works best in a dark or darkened environment. The visual effect or fluid of the 
projections can be enhanced when used in combination with other interactive products. 
 
Take into account the following projection distances: 
 

 
 

9. Security 

Use this product under supervision only. Check the product for damage and completeness before 
commissioning. Report deviations directly to Nenko. 
 
Read this manual carefully and store it in a safe, accessible place for later use. 
 
The projector is only  suitable for use in dry, indoor spaces. Make sure that the projectorcannot come 
into contact withmoisture,  and do not place the projector directly next to highly flammable 
materials. Avoid steam, moisture, extreme heat, dust and vibration. 
 
Do 

not

 turn on the device when it has fallen, is damaged, has interference, or when the plug or cord 

is damaged. 
 
Use only accessories intended for this projector.  Use of unsuaddressed accessories may result in 
accidents, injury or damage.  If in doubt, please contact Nenko. 
 

 
 

Содержание 22611130







Отзывы: