background image

 

 

 

 
1. Name of the product 

LED Pro wheel rotator 
 

2. Product code 

22611130 
 

 

3. Colour 

As pictured. 
 

4. Short description 

This LED projector is energy efficient, emits little heat and is virtually maintenance-free due to the 
built-in LED lamp. This projector is extremely suitable to place on a sheet or shelf, but due to the 
weight of 3.2 kg less suitable for hanging from the ceiling.  Comes with magnetic wheel motor. With 
85 mm lens. 
 

5. Content 

1x LED Projector 
1x Wheelrotator  
1x 12V DC Transformer with 2 meter cord. 
 

6. Sensory

 

 stimulations 

Sight 
 

7. In Use 

Read this user manual before commissioning. Find a suitable location for the projector, taking into 
account the following: 
This product requires a grounded outlet, in accordance with the specifications on the projector/ 
mentioned under point 10. 
 
Make sure the projector is focused on a light surface without obstacles. 
 

Do not place the projector at an angle of more than 90⁰, this may cause the 

effect and liquidwheel or 

other accessories to fall out of the projector at risk of damage and/or injury. 
 
Free ventilation must be possible around the projector, especially at the ventilation grille. 
Do not place the projector too close to heat sources such as a radiator.  
 
This product is meant to look at, and does not need to be touched other than when turning it on and 
off. However, it may be necessary to touch the projector in the meantime in order to change effects 
or liquids.  
 
Mount the projector in a stable location that can support the weight of the projector and accessories, 
even if the projector falls. For standing placement, use a central bolt and nut (min. 14 mm e.g. 
M10x20mm) and fix the bracket with at least 2 screws e.g. 2x 40 mm (none wood screws). 
 
 
 

Содержание 22611130







Отзывы: