1 INTRODUCTION
The NEMTEK Taut Wire Node provides a communication interface to the NEMTEK Taut Wire
sensors and other third-party security systems.
Two separate sensor input channels, each capable of accommodating 31 Taut Wire sensors are
provided. Each channel provides a relay output, which will energise a configurable wet or dry
contact in an alarm situation. The board can be easily set up by means of the on-board display,
pushbuttons and jumpers.
The Node 1 board offers a basic relay interface, whereas the Node 2 board is equipped with an
Ethernet port for network connectivity.
It is recommended that the Node board is installed inside the NEMTEK Power Supply Module,
which can be powered from a standard 230V/50Hz household socket and includes battery
backup in the event of power failure.
2 DISCLAIMER
NEMTEK Holdings (Pty) Ltd or any of its subsidiary companies does not guarantee that the
operation of the product will be uninterrupted or totally error free.
Product specifications may be altered without prior notification.
Introduction & Disclaimer
3
