INTRODUCTION
Thank you for choosing our product! NEMTEK Electric Fence Energizers are designed and
manufactured to provide many years of reliable use, if installed and maintained correctly. The
guidelines provided in this manual will assist you with the basic operation and maintenance of
your energizer.
Currently this energizer is designed and manufactured in South Africa for the South African and
international markets. More information on our products and general information are available
on our web site at: http://www.nemtek.com.
COMPANY PROFILE
The NEMTEK Group of Companies manufacture and distribute intelligent electronic agricultural
fencing systems, security and perimeter control systems and have been involved in the security
industry since 1990.
We have our own research and development team, designing and manufacturing a full range of
globally competitive electric fence energizers and related products.
NEMTEK is continually updating its products according to South African and international
standards in order to ensure the highest quality products and continuous customer satisfaction.
Electric fencing can be lethal. Avoid head contact with the fence. When installing
please take careful note of the options available for current limiting resistors, the
programmable output energy levels as well as the low-voltage operation of the
energizer.
AGRI Solar
Introduction & Company Profile
3
Energizer
AGRI Solar
Using the Nemtek Tag
11
The Nemtek tag is used to toggle the energizer on/off or to toggle the energizer between
the low or high power operating state. Hold the tag over the Nemtek logo on the front of
the energizer and the energizer will emit a short beep upon detecting the tag.
To toggle the energizer on or off, remove the tag after this first beep and the energizer
will emit a further beep when turning on, or a double beep when turning off.
To toggle the low/high power operating state of the energizer, keep presenting the tag
after the initial detection beep. After about 1.5 second has passed, a long beep will be
emitted. The tone of this long beep will be low if the energizer has switched to low
power mode or high if the energizer has switched to high power mode. Once active, the
(ENERGIZER) LED will pulse green if the energizer is in high power mode or red if the
energizer is in low power mode.
In order to extend the battery operating life of the energizer, The BATTERY and SOLAR
indicators will only remain active for 1 minute each time the Nemtek Tag is presented to
the energizer. The indicators do however remain active, should solar power be present
and the energizer is not actively pulsing the fence.
Tag
Energizer
AGRI Solar
Using the Nemtek Tag
11
The Nemtek tag is used to toggle the energizer on/off or to toggle the energizer between
the low or high power operating state. Hold the tag over the Nemtek logo on the front of
the energizer and the energizer will emit a short beep upon detecting the tag.
To toggle the energizer on or off, remove the tag after this first beep and the energizer
will emit a further beep when turning on, or a double beep when turning off.
To toggle the low/high power operating state of the energizer, keep presenting the tag
after the initial detection beep. After about 1.5 second has passed, a long beep will be
emitted. The tone of this long beep will be low if the energizer has switched to low
power mode or high if the energizer has switched to high power mode. Once active, the
(ENERGIZER) LED will pulse green if the energizer is in high power mode or red if the
energizer is in low power mode.
In order to extend the battery operating life of the energizer, The BATTERY and SOLAR
indicators will only remain active for 1 minute each time the Nemtek Tag is presented to
the energizer. The indicators do however remain active, should solar power be present
and the energizer is not actively pulsing the fence.
Tag
