Nemo V2 Divers, Руководство пользователя

Страница: 7 / 16

5
ASSEMBLY
1. Battery charging
Use only the battery charger provided with the drill. Only this battery charger is matched to the
lithium-ion battery of your power tool. Please use the charger in a dry environment. The charger is not
waterproof.
Note: The battery is supplied partially charged. To ensure full capacity of battery, completely charge the
battery in the battery charger before using your power tool for the first time. The lithium-ion (Li-ion)
battery can be charged at any time without reducing its service life. Interrupting the charging procedure
does not damage the battery.
The Li-ion battery is protected against deep discharging by “electric cell protection” (ECP). When the
battery is empty, the machine is switched off by means of a protective circuit. The connected tool no
longer rotates.
Do not continue to press the On/Off switch after the machine has been automatically switched off.
The battery can be damaged. The battery is equipped with a NTC temperature control which allows
charging only within a temperature range of 0˚C- 45˚C (32˚ F - 113˚ F), ensuring a long battery service
life. Please see the “Disposal” section below for instructions on the proper disposal of the battery.
Removing the battery
The battery pack (7) is equipped with one locking ring that prevents the battery from falling out. As long
as the battery is inserted in the power tool, it is held in position by means of a movement locking
component.
To remove the battery (7), rotate the locking ring (6) counterclockwise and pull out the battery toward
the bottom. Do not exert any force.
7
6