Nemesis Audio
17
Toggle Rear Lamp B Flash:
Begin pulsing of the remote port relay contacts connected to the remote
lamp “B” port.
Switch Video 1:A:
Set the output of Video Board 1 to Input A.
Switch Video 1:B:
Set the output of Video Board 1 to Input B.
Switch Video 2:A:
Set the output of Video Board 2 to Input A.
Switch Video 2:B:
Set the output of Video Board 2 to Input B.
Switch USB:A:
Route keyboard and mouse connections to the CPU A connection.
Switch USB:B:
Route keyboard and mouse connections to the CPU B connection.
Toggle Video 1:
Set the output of Video Board 1 to the opposite input to that currently selected.
Toggle Video 2:
Set the output of Video Board 2 to the opposite input to that currently selected.
Toggle USB:
Route keyboard and mouse connections to the opposite CPU connection to that
currently selected.
Toggle KVM:
Switch all video, keyboard and mouse connections to the opposites of those currently
selected.
Toggle KVM Preview:
Similar to Toggle KVM, but takes a snapshot of the current state of video,
keyboard and mouse connections before switching to enable returning back to this state when KVM
preview is exited.
Recall MIDI Patch A:
Change all MIDI routing connections to the “Patch A” state as defined in the
MIDI config.
Recall MIDI Patch B:
Change all MIDI routing connections to the “Patch B” state as defined in the
MIDI config.
Toggle MIDI Patch:
Change all MIDI routing connections to the opposite state to that currently in
operation.
Run Macro (not available in Macro definitions)
Macro:
Select a Macro to run when the event is fired.