Nemesis CCS-2 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 22

Nemesis CCS-2 Скачать руководство пользователя страница 16

Nemesis Audio

16

Send MIDI Sysex

Port:

Choose a destination for the generated MIDI event to be sent, as per standard MIDI events.

Data:

Enter a system exclusive string, starting with F0 ending with F7, up to 30 bytes long, to be sent

when this event fires. Examples include MMC, MSC and custom control strings.

Relay Event

Relay:

Select the relay number to control.

Action:

Desired action for the relay. Available options include Turn ON (close the relay contacts),

Turn OFF (open the relay contacts), Pulse ON (temporarily close the contacts for the duration
defined in the GPI Configuration, then return to an open state), Pulse OFF (temporarily open the
contacts for the duration defined in the GPIO Configuration, then return to a closed state).

System Event

Front Lamp A On:

Illuminate the lamp inside the Front Switch “A”.

Front Lamp A Off:

Turn off the lamp inside the Front Switch “A”.

Front Lamp B On:

Illum

inate the lamp inside the Front Switch “B”.

Front Lamp B Off:

Turn off the lamp inside the Front Switch “B”.

Rear Lamp A On:

Close the remote port relay contacts to illuminate a lamp connected to the 5-Pin

remote lamp “A” port.

Rear Lamp A Off:

Open the remote port relay contacts to turn off a lamp connected to the 5-Pin

remote lamp “A” port.

Rear Lamp B On:

Close the remote port relay contacts to illuminate a lamp connected to the 5-Pin

remote lamp “B” port.

Rear Lamp B Off:

Open the remote port relay contacts to turn off a lamp connected to the 5-Pin

remote lamp “B” port.

Toggle Front Lamp A:

Invert the state of the lamp inside the Front Switch “A”.

Toggle Front Lamp B:

Invert the state of the lamp inside the Front Switch “B”.

Toggle Rear Lamp A:

Invert the state of the remote port relay contacts connected to the remote

lamp “A” port.

Toggle Rear Lamp B:

Invert the state of the remote port relay contacts connected to the remote

lamp “B” port.

Toggle Front Lamp A Flash:

Begin

flashing of the lamp inside the Front Switch “A”.

Toggle Front Lamp B Flash:

Begin flashing of the lamp inside the

Front Switch “B”.

Toggle Rear Lamp A Flash:

Begin pulsing of the remote port relay contacts connected to the remote

lamp “A” port.

«
...
14
15
16
17
18
...
»

Содержание CCS-2























Отзывы:

Нет отзывов