Nemco Global Solutions GS1504-C, Руководство пользователя

Страница: 5 / 10

5
Lock Nut
Door Knob Handle Assembly
Step 2: Attach axle assembly to base on the
side opposite the handlebar (Figure B). Use
2 long bolts, 4 washers, and 2 lock nuts on
each support (use a washer on each end).
Once assembled, tighten the axle nuts
to secure.
Step 3: Assemble long legs to base.
Fasten each leg using 2 long bolts,
4 washers, and 2 lock nuts.
Step 4: Position the leg support bracket as
shown in Figure B. Fasten bracket to leg
using a long bolt, washer, and lock nut.
Fasten bracket to cabinet using a short bolt,
washer, and lock nut.
Step 5: Install an adjustable foot onto each
long leg. Ensure foot is fully inserted in leg as
shown in Figure C.
Step 6: Slide a wheel onto each end of the
axle and fasten with a lock nut (Figure D).
Tighten the lock nut enough to take up
clearance.
DO NOT overtighten.
Step 7: Position cart upright, and ensure all
fasteners are secure.
Step 8: Assemble a bracket on each end of
the handlebar. Fasten handle assembly to
cabinet using 4 short bolts, 4 washers, and
4 lock nuts (Figure E).
Step 9: Carts equipped with a door, install
the door knob onto the cabinet door using
the 8‐32 screw.
Step 10: Carefully install popper by setting it
in place on the cart, make sure the popper
feet set securely into the holes provided.
Step 11: If needed, adjust cart feet to ensure
popper and cart are level.
Leg Support
Bracket
Figure B
– Attach Axle Assembly and Legs
Leg Support
(long)
Figure C
‐ Install
an Adjustable Foot
on each leg.
Figure D
Figure E
Attach Axle
Assembly