Nemco Global Solutions GS1504-C, Руководство пользователя

Страница: 4 / 10

4
INSTALLATION INSTRUCTIONS
Inspection of Shipment
After unpacking, check thoroughly for any damage which may have occurred in shipment.
Purchaser should make claim directly to carrier for any damages to merchandise that occur in
transit. The warranty does not cover damage that occurs in transit, or damage caused by abuse,
or consequential damage due to the operation of this machine, since it is beyond our control
(reference warranty in back of manual).
Manual
Read and understand the operator’s manual and all other safety instructions before using this
equipment. To order copies of the operator’s manual contact Global Solutions, 301 Meuse
Argonne Hicksville, OH 43526, 800.782.6761, or go to www.nemcofoodequip.com.
Items Included with this Unit

Base Cabinet

Handle Bar and 2 Handlebar Brackets

2 Wheels

1 Axle

2 Short Axle Supports

2 Long Leg Supports

2 Leg Support Brackets

2 Adjustable Feet (for long legs)

Hardware Kit (includes door knob)
Setup – Cart Assembly
This cart requires assembly (units with a door, come with the door and magnet pre‐assembled to
the base). Remove all packaging and tape, then follow the steps below for cart assembly.
Step 1: Pre‐assemble the axle and the 2 short
axle supports (Figure A). To assemble, screw
a 1/2‐13 nut onto each end of the axle until it
almost bottoms out.
Then, slide a short support onto each end of the
axle as shown. Fasten with a 1/2‐13 nut (finger
tighten only so supports can be adjusted when
installing to the base).
Axle Nut
Axle Nut
Figure A
‐ Pre‐assemble Axle and Supports
Axle
Support
(short)