Version: 5.0
28.08.2017
KEN001BT25
10
EN
CONTINUOUS DRAINAGE
NOTE
●
Check the installation of draining hose
It may wet furniture if there is a leak.
●
Check drainage condition and check if the hose is bent.
●
Check if water freezes in the hose.
It may leak if the water freezes up and blocks the hose.
1. Remove the bucket.
3. Install the draining hose.
Connect the draining hose
to the outlet, and clamp
it firmly.
2. Pull out the bucket stopper.
Tear the drainage holes with
screwdriver or other tools.
You will need the following items:
● A soft hose from device to reservoir with hose inner diameter 10mm (purchase
according to your demand).
● Screwdriver
About setting
If temperature is different between water inside the draining hose and outside, the water on
surface of the hose will condense.
In this case, please stop the device accordingly.
4. Put the bucket back to the device.