Nelso twig Скачать руководство пользователя страница 23

Страница: 23 / 24

848 Airport Road, Walla Walla, Washington 99362 U.S.A.
Tel: +1 509.525.7660 / Fax: +1 509.525.7907

twigwirelesscontrols.com

If multi-valve modules are used then it is recommended that the maximum of 200 valves be controlled by

one TD200 controller. It is possible to have as many as 400 valves controlled but not recommended more

than 200 valves be used due to the complexity that may occur.

8.9.1 PROGRAMS:

The TD200 controller has a large capacity able to easily handle 50 unique programs. It is very flexible

because there are few limits so that any TWIG/valve can be used in any program and the programs can run

concurrently or individually.

Each program can have multiple valves. The time of each one can be individually set to operate in sequence.

8.9.2 MAnUAl COnTROl OPERATIOn:

The ‘Manual Control’ feature of the TD200 is useful to make a quick check of the system and to run some

valves of a period of time in order to adjust soil moisture level. For running any specific valves to water for

any reason.

Repeaters have advanced technology. These will reinforce the network when needed otherwise they are not

in the way for direct TD200 to TWIG communication.

This wireless technology has built in redundancy of signal transmission. Due to the nature of wireless

systems, transmission and reception of data can never be fully guaranteed. Although loss of signal is rare

every communication in this network is double checked. The use of a pressure relief valve to protect the

irrigation system pipes is essential.

Nelson Wireless Specification Continued

Содержание twig

























Результаты поиска

Содержание twig

Отзывы:

Похожие инструкции для twig

Бренды по названию

Популярные бренды

Nelso twig, Руководство пользователя

Результаты поиска

Содержание twig

Отзывы:

Похожие инструкции для twig

Бренды по названию

Популярные бренды