14
t
848 Airport Road, Walla Walla, Washington 99362 U.S.A.
Tel: +1 509.525.7660 / Fax: +1 509.525.7907
twigwirelesscontrols.com
5.0 USInG ThE ADJUST fUnCTIOn
The TWIG programs can easily be changed in the adjust menu. Programs can be set to either READY, OFF,
SCHEDULED or RESET. Changes to any program can be adjusted for watering different length of time or
different number of cycles.
5.1 ExAMPlE Of MAKInG An ADJUSTMEnT
TO wATERInG TIME:
Let’s do an example rotating the dial to ADJUST. The list of programs
becomes visible. Scroll down the list to the line for program you want. We
can adjust program times. Cycles is the number of times you want each
group of valves to water before being finished.
Length is the amount of time for one complete water cycle of all groups.
Group is the status of valve group in the program. The time that is shown
left (or remaining time) is to complete the cycle that is running. If the
program is not running anything then dashes are here.
The list shown below is for each valve Group number in order.
To demonstrate the ‘Length” adjustment put the marker on the Length
line and press ENTER. This adjustment can be thought of as a total time adjustment to the whole program
(sometimes it is called a water budget). Change the time from 12 minutes to 6 minutes. The watering
time for all groups in this program will become 50% as long. Notice the % change. Next make another
adjustment, change the time for any group. Move the marker to Group 2. Press ENTER and adjust the new
time to 2 minutes. This change takes effect immediately. The next time Group 2 runs, the watering time will
be the new time you just set. The ability to Adjust specific events without stopping any of the programs is
very useful.
TWIG
note
ADJUSTInG PROGRAMS On ThE fly wIThOUT STOPPInG ThE
wATERInG PROGRAMS CAn SAvE A lOT Of TIME AnD REDUCE
flOw SURGE PROblEMS
