
2
Installation & Bypass Considerations
Raw
Water
Union
(Optional)
Union
(Optional)
Tank Side
(Inlet)
Riser Side
(Outlet)
To
Service
To Drain
Bypass Line
90° Ball
Valve
90° Ball
Valve
90° Ball
Valve
90° Ball
Valve
39-3/4"
(100.96cm)
to Floor
NOTE:
Drain should be considered in plumbing of system
as per diagram. Opening drain valve will allow for
flushing of cartridge. Closing inlet and outlet valve
and opening drain will relieve pressure on filter
tank for cartridge replacement.
Provisions should be made to install three
90 degree ball valves to create a bypass to
the cartridge filter tank. Because of the pipe
size, this will need to be created on the job
site. Any piping materials may be used;
however, be sure to observe local plumbing
codes. These ball valves should be turned off
to the filter tank for future cartridge replacement
and allow for system bypassing should other
service be required.