background image

INSTALLATION INSTRUCTIONS 

1. Remove existing toilet and prepare installa-

tion surface.

•  Shut off toilet supply and flush tank completely.
•  Disconnect and remove supply line.
•  If replacing a toilet remove old toilet and existing wax 

ring. Cover/plug floor waste opening.

•  Clean any old wax or debris from from installation area. 

 

 

 

 

 

 

 

 

 

 

 

•  Confirm that current supply location coincides with  

desired toilet location and rough-in dimensions.  

Supply relocation may be necessary for proper toilet 

installation.

•  Position toilet template on finish floor making sure it 

aligns with current waste location; tape template se-

curely to floor.

 

2. Turn toilet on its side (please protect the 

ground surface with soft material to prevent 

damage to toilet), and press new wax seal firm-

ly around waste flange. Apply a small bead of 

silicone sealant around toilet base.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. Install T-bolts in correct floor position and 

fasten closet flange.

 

 

 

4. Position toilet squarely with wall and align 

toilet with closet flange.
Slowly lower toilet down onto closet flange 

making sure base mounting holes are aligned 

with mounting anchors on finished floor.

 

 

 

 

 

 

5. Press toilet down firmly on wax ring and 

flange until toilet is securely seated on floor.

 

CONCEALED MOUNT WITH SIDE ACCESS INSTALLATION INSTRUCTIONS

Wax Seal

Sealant

T-Bolt

Closet Flange

**NOTE

: Installation surface must be clean  

and level before new toilet is installed.

**

MUR

NBKD-40A

Содержание MUR NBKD-40A











Отзывы: