ROCA
SPECIFICATIONS
Recommended Use
Domestic, hotel and commercial
Rim Configuration
Box Rim
Bowl Configuration
P Trap (Converts to S using plastic S-bend
provided)
Set Out
P Trap: 180mm, S Trap: 95mm-165mm
Pan Fixing
Screwed to the floor using brackets (supplied)
and bedded with sealant
Cistern Fixing
Top-fix cistern bolted directly to the bowl
Seat
Matching top-fix, soft-close seat supplied with
suite
Water Inlet
Bottom Inlet, right hand side (reversible)
Inlet Valve
Recommended max. working pressure 1000kPa
Weight
Pan: 26.7kg, Cistern: 14.4kg
To see the complete ROCA range go to
www.reece.com.au/bathrooms
385
Min 95-Max 165
180
355
385
Min 95-Max 165
355
600
140
405
760
165
180
385
Min 95-Max 165
180
355
385
Min 95-Max 165
355
600
140
405
760
CLEANING RECOMMENDATIONS
We recommend the use of soapy water or approved cleaners.
This product should not be cleaned with abrasive materials.
Damage caused by any improper treatment is not covered by the product warranty. Refer to Warranty Conditions.
DAMA SENSO COMPACT
BACK TO WALL TOILET SUITE BOTTOM INLET
Dimensions are nominal measurements only
page 1 of 5
Disclaimer:
Products in this specification manual must by regulation be installed by licensed and registered
trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from
their range without prior notification.Dimensions are nominal measurements only. Dimensions and set-outs
listed are correct at time of publication however the manufacturer/distributor takes no responsibility for
printing errors.
Tech Page Version 3
TM
WMKA 02321
AS 1172.1
The more
stars the more
water efficient
WATER RATING
www.waterrating.gov.au
In accordance with AS/NZS 6400
Licence No. 0137
Bathroom Products Australia
4.5 L per full flush / 3 L per half flush
3.5
litres
average flush