Emergency Situations:
●
Fire or Smoke: In the event of a fire or the release of
smoke from the Grid Battery system, immediately
evacuate the area and contact emergency services.
●
Battery Cell Breakage or Leakage: In the unlikely event
of battery cell breakage or leakage, the battery can
release corrosive electrolytes. Contact with the liquid or
gas may cause skin irritation and chemical burns.
If you come in contact with the substance, adhere to the following
steps:
○
Inhalation: If you inhale the substance,
immediately evacuate the contaminated
area and seek immediate medical
assistance.
○
Eye Contact: In case of contact with the
eyes, rinse them with a continuous flow of
water for a duration of 15 minutes, and
promptly seek medical attention.
○
Skin Contact: If the substance comes into
contact with your skin, thoroughly wash the
affected area with soap and water, and
promptly seek medical attention.
○
Ingestion: If you accidentally ingest the
substance, induce vomiting and seek
immediate medical assistance.
●
Power Outage: If there is a power outage or system
malfunction, contact the manufacturer's support or a
qualified technician for assistance. Do not attempt to
disassemble or repair the system without proper
training and authorization.
The battery must be removed from service in the following
situations:
●
The battery shows physical damage or is swollen.
●
The battery emits an odor.
●
It becomes significantly hotter than usual.
●
The battery makes unusual sounds.
●
The battery is leaking.
When removing a damaged battery from service, ensure that the
battery or device is not near other flammable materials. If possible,
move the battery or device to a safe location, such as outdoors.
Monitor to ensure that the battery does not ignite. If the situation
leads to the battery igniting or producing smoke, follow the
instructions in the "
Emergency situations
" section. Return the
damaged battery or device to the product's retailer or inquire with
the retailer about where the battery can be returned.
Hazard Reporting:
If you notice any unusual noises, odors, or abnormalities with the
Grid Battery system, report them to the support center
immediately. Do not ignore potential warning signs.
4. Installation
Pre-Installation Planning
●
Verify that your Grid Battery system is
compatible with your existing electrical
system.
●
Read and understand section 8 of the user
guide and ensure that the battery
installation site fits the proper storage
location and environment
recommendations.
●
Check local regulations and obtain any
necessary permits or approvals.
●
Ensure you have all the required tools,
equipment, and materials.
●
Clear any obstacles and ensure adequate
space for installation.
Installation steps for countries where installation by
electrician is needed:
●
Place the antenna supplied with the battery in position.
●
Carefully place the battery in its designated location.
Connect the power cable to the power cable lock.
●
Attach the battery power cable lock by pulling on the
red locking mechanism while inserting it into the
battery.
●
Mark the breaker.
●
Connect the battery system to the electrical panel
behind its own breaker.
●
Ensure that all electrical connections are securely
attached and tightened correctly.
●
Perform a thorough system test to ensure proper
installation and operation.
Note! In some countries, you need permission from the local
electricity distribution company to connect Grid Battery to the
grid. Always check your local guidelines and regulations
before installing the battery.
Note! When you want to turn off your battery or cut off power
using the fuse box, remember to first turn off the battery
either with the ON/OFF button or through the application. It is
important to ensure that the battery is turned off before
proceeding with other actions.
Содержание GRID BATTERY
Страница 1: ......
