17
1
Press briefly and release the programming button of the
MINI-RX 2 times.
The LED of the receiver blinks twice and the buzzer emits
2 beeps every 2 seconds.
x 2
x 2 +
x 2
2
Hold the programming button of the MINI-RX pressed.
The LED of the receiver blinks again and the buzzer emits
another beep.
> 3s
x 1 +
x 1
3
Press briefly and release the programming button once;
the buzzer emits 1 beep: →
Output 1
.
Press briefly and release the programming button again;
the buzzer emits 2 beeps: →
Output 2
.
Press briefly and release the programming button again;
the buzzer emits 1 beep: →
Roll back to output 1
.
The system will indicate the selection just made to the user
every 2 seconds through the LED with a number of (fast)
blinks and beeps equal to the selected output.
x
n
x
n
+
x
n
4
Press the button of the remote control that you would like
to memorize.
When the memorization is complete, the receiver will emit
two long blinks of the LED and 2 long beeps of the buzzer.
x 2 +
x 2
5
To learn an additional remote control (or key), repeat step
3.
6
To conclude the entering of a remote control, wait for the
programming time-out that will be indicated by a long beep
and a long blink of the LED.
x 1 +
x 1
Note
If the memory is full, the receiver will emit 10 blinks and 10
beeps.
x 10 +
x 10
7
End
LEARNING THE FIRST REMOTE CONTROL OR ADDITIONAL REMOTE
CONTROLS IN MOTOR MODE
Step
Description
Example
1
Press briefly and release the programming button of the
MINI-RX two times. The LED of the receiver blinks twice
and the buzzer emits 2 beeps every 2 seconds.
x 2
x 2 +
x 2
18
2
Hold the programming button of the MINI-RX pressed. The
LED of the receiver blinks again and the buzzer emits
another beep.
> 3s
x 1 +
x 1
3
To scroll through the menu, press the programming button
of the MINI-RX briefly each time until reaching the desired
selection
(see also the example described in the Chapter
“S
ELECTING THE DEVICE MODE
”)
.
1 beep → mode 2.1 - Step / Step
2 beeps → mode 2.2 – Up / Stop
3 beeps → mode 2.3 – Down / Stop
4 beeps → mode 2.4 - Deadman's Step / Step
5 beeps → mode 2.5 - Deadman's Up
6 beeps → mode 2.6 - Deadman's Down
7 beeps → mode 2.7 – Stop
8 beeps → mode 2.8 – Up
9 beeps → mode 2.9 – Down
1 beep → Roll back to mode 2.1 - Step / Step
The system will indicate the selection just made to the user
every 2 seconds through the LED with a number of (fast)
blinks equal to the selected function and through the
buzzer with a number of (fast) beeps equal to the selected
function.
x
n
x
n
+
x
n
4
Press the button of the remote control that you would like
to memorize.
When the memorization is complete, the receiver will emit
two long blinks of the LED and 2 long beeps of the buzzer.
x 2 +
x 2
5
To learn an additional remote control, repeat step 3.
6
To conclude the entering of a remote control, wait for the
programming time-out that will be indicated by a long beep
and a long blink of the LED.
x 1 +
x 1
Note
If the memory is full, the receiver will emit 10 blinks and 10
beeps.
x 10 +
x 10
7
End
Notes:
- Maximum operating time for the motor version: → 6 minutes.
- Default motor operating time: → 4 minutes.
