background image

 

Work area safety 

1. 

Keep work area clean and well lit. 

Cluttered or dark areas invite accidents. 

2. 

Do not operate power tools in explosive atmospheres, such as in the 
presence of flammable liquids, gases or dust. 

Power tools create sparks 

which may ignite the dust or fumes. 

3. 

Keep children and bystanders away while operating a power tool. 

Distractions can cause you to lose control. 

 

Electrical safety 
4.  Power tool plugs must match the outlet. Never modify the plug in any 

way. Do not use any adapter plugs with earthed (grounded) power tools.   

Unmodified plugs and matching outlets will reduce risk of electric shock. 

5. 

Avoid body contact with earthed or grounded surfaces such as pipes, 
radiators, ranges and refrigerators. 

There is an increased risk of electric 

shock if your body is earthed or grounded. 

6. 

Do not expose power tools to rain or wet conditions. 

Water entering a 

power tool will increase the risk of electric shock. 

7. 

Do not abuse the cord. Never use the cord for carrying, pulling or 
unplugging the power tool. Keep cord away from heat, oil, sharp edges 
or moving parts. 

Damaged or entangled cords increase the risk of electric 

shock. 

8. 

When operating a power tool outdoors, use an extension cord suitable 
for outdoor use. 

Use of a cord suitable for outdoor use reduces the risk of 

electric shock. 

9. 

If operating a power tools in a damp location is unavoidable, use a 
residual current device (RCD) protected supply.

 

Use of an RCD reduces 

the risk of electric shock. 

Personal safety

 

10. 

Stay alert, watch what you are doing and use common sense when 
operating a power tool. Do not use a power tool while you are tired or 
under the influence of drugs, alcohol or medication. 

A moment of 

inattention while operating power tools may result in serious personal injury. 

11. 

Use personal protective equipment. Always wear eye protection. 

6

Содержание M0L-AJ-300B






























Отзывы: