−
The cutting edge is obviously damaged;
−
The saw pulls to the left or right in the wood. The reason for this behaviour is
uneven sharpening of the saw chain, or damage to one side only.
Sharpen the saw chain frequently, but remove only a little material each
time.
TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTION
Bar and chain
running hot and
smoking.
Chain
oil tank empty.
apply oil
Motor runs, but
chain is not
rotating.
1.
Tension chain.
Refer to Chain Tension
earlier in this manual.
1. Retension chain, Refer to Chain
Tension earlier in this manual.
2.
Check oil tank.
2. Refer to Assembling the Bar and
Chain earlier in this manual.
3.
Check guide bar
and chain for damage.
3. Inspect guide bar and chain for
damage.
Notice:
-
the declared vibration total value has been measured in accordance with a standard
test method and may be used for comparing one tool with another;
-
the declared vibration total value may also be used in a preliminary assessment of
exposure.
Warning:
-
the vibration emission during actual use of the power tool can differ form the
declared total value depending on the ways in which the tool is used”.
-
avoid vibration risk, suggestion:
1) wear glove during operation;
2) limit operating time and shorten trigger time.
26