First press the lock-off button, then the switch trigger. The saw chain starts
immediately.
Release the switch trigger. The saw chain must come to an immediate standstill.
CAUTION:
• Should the saw chain not come to a stop within two seconds when this
test is performed, the saw must not be used. Consult a specialist repair
shop.
Battery
WARNING!
Always remove the battery pack from the product for charging!
Charge in a safe location away from moisture, heat or any hazard to the
charger or other danger!
> Align the battery pack to the slots on the charger and slide it in until it locks in place
(Fig. 15, 16)
>Connect the charger to the power supply.
WARNING!
Check the voltage! The voltage must comply with the
information on the rating label!
(1) (2)
Fig.15 Fig.16
(1)Charger
(2)Battery pack
>Allow sufficient charging time (see technical data), and then disconnect the charger
from the power supply.
> Press the release button on the battery pack and remove it from the charger.
14
