background image

3

SAFETY SUMMARY

LITHIUM BATTERY HAZARDS

Lithium batteries are very energy dense and provide a high level of power to their 

respective applications. Care must be taken to properly manage all lithium batteries 

in their use, charging and storage to ensure safety for the operator and equipment 

serviced. 

 

All rechargeable lithium batteries are potentially hazardous and can present a serious 

FIRE HAZARD if damaged or improperly used. A fire is most likely to occur during the 

charging process under the following circumstances:

a.   THE BATTERY HAS BEEN FULLY DISCHARGED AND IS NOT 

RECHARGED SHORTLY AFTERWARD. Lithium batteries should be recharged 

within 24 hours of use, particularly if fully or near fully discharged.

b.   CHARGING IS ATTEMPTED AT TEMPERATURES BELOW 40°F (4°C). 

Charging below 40°F (4°C), causes a chemical reaction in the battery cells that 

can cause permanent damage and the possibility of fire or explosion during 

charging.

c.   THE BATTERY HAS BEEN EXPOSED TO LIQUIDS, ESPECIALLY 

SALTWATER. Exposure to liquids can cause internal corrosion or damage 

to the cells or to the internal Battery Management System (BMS). The BMS 

protects the battery from overcharging, high self-discharge or imbalanced 

charging of the cells, any of which can present the possibility of fire during 

recharging.

d.   OPERATING OR CHARGING A BATTERY THAT HAS BEEN DAMAGED 

FROM DROPPING OR FROM SHIPPING DAMAGE. If your unit has a crack 

on the outer case, it should not be charged, as it may may contain a damaged 

battery.

e.   USING A CHARGER OTHER THAN SPECIFICALLY DESIGNATED FOR THE 

PARTICULAR BATTERY. Each battery wall charger provides charging voltage, 

current and charge control parameters specific to that particular wall charger. 

The specific parameters of the wall charger provided with your unit exactly meet 

the charging requirements of its internal battery. These could be very different 

from other lithium battery wall chargers and are certainly different than chargers 

for use with SLA, NiCd, NiMH, or other rechargeable batteries. Never use a 

charger other than the one provided with your unit – this could present a serious 

fire risk.

Содержание CT4840












Отзывы: