9
TROUBLESHOOTING
Problem: I charged the unit when the LED indicated it was low, but after several
hours, there is no change in status.
Answer:
Suspect a faulty charger.
Problem: While charging, the four blue status LEDs light to indicate full charge
has been reached. But, when the unit is removed from the charger and
Power Button pressed, the status LEDs indicate a low or completely dead
battery.
Answer:
Suspect a battery problem.
QUESTIONS & ANSWERS
Question: How many jump starts can a fully charged POWERLIGHT RESCUE
provide before needing to be recharged?
Answer:
1 to 8. Factors impacting this are temperature, general condition of the
vehicle being jump started, engine type and size.
Question: Can the battery in the POWERLIGHT RESCUE be replaced?
Answer:
No, the battery connections inside the POWERLIGHT RESCUE make it
impossible to replace the battery.
Question: What is the ideal in-use temperature for the POWERLIGHT RESCUE?
Answer: Room temperature. The POWERLIGHT RESCUE will also operate at
low and high temperatures, however its capacity will be reduced. For
instance, high heat will increase self-discharge of the POWERLIGHT
RESCUE battery.
Question: I have a regular 10 amp battery charger, can I use it to recharge the
POWERLIGHT RESCUE?
Answer: No, only the supplied AC adapter should be used.
Question: Is the POWERLIGHT RESCUE goof proof?
Answer: No, jump starting instructions must be followed. Read and understand
all safety and operating instructions in this manual and those found in
the owner’s manual of any vehicle being jump started before using your
POWERLIGHT RESCUE.
Question: How long should I charge the POWERLIGHT RESCUE?
Answer: It should be charged for a minimum of 6 hours when new. When
recharging, the POWERLIGHT RESCUE should be charged until full
charge is indicated.
Question: How often should I charge the POWERLIGHT RESCUE?
Answer:
It should be charged whenever the status LED indicates the unit is low
and after every use. Otherwise, it should be charged every 90 days.
