8
30. To lower the cart onto its wheels you should: a
：
Ghock the rear wheels as shown in
Figure 13
.b:Get
the assistance of another person to help you lower the cart onto it’s wheels.
31. Assemble the two pivot bars to the front tongue section using four M8X20 hex bolts, Ø8 lock washer,
Ø8 Flat Washer and M8 hex nuts. Don’t tighten yet. See
Figure 14.
32. Assemble the pivot bars to the rear tongue section using a M12X120 hex bolt and Ø12 Flat Washer
and M12 hex lock nut. Tighten the lock nut ,leaving it just loose enough to allow the front tongue to
pivot. Now tighten the four hex bolts, lock washers and hex nuts assembled to the front tongue in
Step 31.See
Figure 14.
33. Assemble the hitch bracket to the front tongue section using two M8X20 hex bolts, Ø8 lock washer ,
Ø8 flat washer and M8 hex nuts. Tighten. See
Figure 15.
34. Assemble the hitch pin through the hitch bracket and the tongue and secure with the hair cotter pin
shown in
Figure 15.
35. Place the tailgate down into the tailgate guides with the top and bottom lips of the tailgate facing to
the rear.
36. If you have not yet greased the wheels, fill the wheel hubs with automotiive bearing type grease.
FIGURE 12
FIGURE 13
FIGURE 15
FIGURE 11
FIGURE 14
