Neilsen CT1646, Оригинальная инструкция

Страница: 15 / 20

The contacts on the battery pack and the charger must be kept clean. All
replacement parts must be replaced by a trained electrician or an authorized
service centre unless stated otherwise in this manual
Cleaning
Clean the angle grinder using a lightly moistened cloth. Only use mild
cleaning agents, never solvents or corrosive chemicals
9.
TROUBLESHOOTING GUIDE
Problem Possible cause Solution
The angle
grinder will
not switch on. Battery pack discharged. Recharge the battery pack.
The battery pack is overheated. Let the battery pack cool down.
The safety switch is not held in. Hold in the safety switch and then press the
on/off switch.
The angle
grinder is
sluggish
and/or shuts
off. Too much pressure applied. Decrease applied pressure.
Battery pack discharged. Recharge the battery pack.
The battery pack is overheated. Let the battery pack cool down.
The motor is overheated. Let the motor cool down.
Faulty brushes. Contact our Customer Services.
Heavy
vibrations. Grinding disc/accessory is
damaged. Check and replace if necessary.
Grinding disc/accessory is loose. Check and replace if necessary.
DISPOSAL
This product should be disposed of in accordance with local regulations. If
you are unsure how to proceed, contact your local authority
ENVIRONMENT
Should your appliance need replacement after extended use, do
not discard it with the household rubbish but dispose of it in an
environmentally safe way.
Waste produced by electrical machine items should not be
handled like normal household rubbish. Please recycle where
recycle facilities exist. Check with your Local Authority or retailer
for recycling advice.
13