Neilsen CT1646, Оригинальная инструкция

Страница: 14 / 20

• Keep the battery charger away from rain or moisture. Exposure of an
electrical device to water increases the risk of an electric shock.
• Hold the tool and the battery pack firmly when installing or removing battery
pack avoid any injury.
1. Assemble and removing the battery pack.
Slide the machine into the battery pack to assemble
the battery pack.
To remove the battery pack, press the battery pack
release button (A) and pull the battery pack out of the
handle.
2. Charging the battery pack
Slide the battery pack onto the charger.
Connect the charger to a suitable mains socket. The
charger may become warm and buzz slightly during
charging. This is normal and does not indicate a fault.
3. When the charger is plug in ,the green light will light up.
When the battery pack is charging the red light will
blink. When the battery pack is fully charged, the red
light will stop blinking and remain lighted up
4. After charging, unplug the charger from the wall
outlet.
The battery pack can become warm if the machine is subject to heavy
use. Always allow the battery pack to cool down before re-charging.
8.
CLEAN AND MAINTENANCE
Maintenance
Always remove the battery pack from the power tool before adjusting,
servicing or repairing it.
12