Neilsen CT1646, Оригинальная инструкция

Страница: 13 / 20

1. Press A and use wrench to loose part B.
2. If the grinding guard isn’t assembled, use the hex key to put the grinding
guard(C) on the machine first.
3. Install the disc.
4. Press A and use wrench to tight part B.
5. Remove the disc as installing step.
ATTACHING THE SIDE HANDLE
Ensure the tool is switched off.
Identify the threaded hole on two positions
of the grinder head (fig.2)
Screw the side handle firmly into one of
them.
ON/OFF SWITCH
Note: Carefully read all the safety instructions and warnings above before
operating the angle grinder.
1. Hold the safety switch in.
2. Press the on/off switch to turn the angle grinder on.
3. Release the on/off switch to turn the angle grinder off.
7.
BATTERY PACK AND BATTERY CHARGER
CAUTION:
• Always switch off the tool before installing or removing of the battery pack.
• O nly use the battery pack with the power tools, using other batteries can
lead to injury or fire.
• Keep unused batteries away from staples, coins, keys, nails, screws or other
metal objects that could bridge the contacts on the battery pack. A short
circuit between the battery pack contacts can lead to burns or fire.
Fig 2
11