ADJUSTING THE GUIDE ARM
1. Pull out 3-4 feet of hose and
lock reel in position.
3. Rotate guide arm in 90
o
increments to desired position. Replace four bolts and
tighten.
Continue by choosing proper mounting hardware. Mount reel using four 1/2"
bolts secured through four slots in mounting base. Use washers on mounting
bolts to help bear weight of reel.
ADJUSTING HOSE STOPPER POSITION
The hose stopper determines the length of hose that remains outside of reel. To
adjust stopper position, first pull hose out past the desired position of hose
stopper. Lock reel in position. Loosen (but do not remove) both stopper bolts just
enough so stopper can slide along hose. Move stopper to desired position.
Tighten stopper bolts until hose stopper cannot slide. Do not overtighten bolts.
2. Remove the four bolts connecting
guide arm to base.
