Neilsen CT0698, Оригинальное руководство пользователя

Страница: 4 / 12

3
your finger on the switch or connect the tool to the air supply with the
switch on.
d.Remove adjusting keys and wrenches before connecting an air
hose to the Air Angle Die Grinder on. A wrench or a key that is left
attached to a rotating part of the tool increases the risk of personal injury.
e.Do not overreach. Keep proper footing and balance at all times.
Proper footing and balance enables better control of the tool in
unexpected situations.
f. Use safety equipment. A dust mask, non-skid safety shoes and a hard
hat must be used for the applicable conditions. Wear heavy-duty work
gloves during use.
g. Always wear eye protection. Wear ANSI-approved safety goggles.
h. Always wear hearing protection when using the tool. Prolonged
exposure to high intensity noise is able to cause hearing loss.
i.Risk of Electric Shock. This Air Angle Die Grinder is not provided
with an insulated gripping surface. Contact with a
″
live
″
wire will also
make exposed metal parts of the tool
″
live
″
and shock the operator.
j.Avoid body contact with grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of
electric shock if your body is grounded.
k.Explore the workpiece to avoid contact with hidden wiring. Thor-
oughly investigate the workpiece for possible hidden wiring before per-
forming work. Contact with live wiring will shock the operator.
5.Tool use and care
a. Use clamps or another practical way to secure and support the
workpiece to a stable platform. Holding the work by hand or against
the body is unstable and is able to lead to loss of control.
b.Do not force the tool. Use the correct tool for the application. The
correct Air Angle Die Grinder will do the job better and safer at the rate for
which the tool is designed.
c.Do not use the tool if the switch does not turn the tool on or off. Any
tool that cannot be controlled with the switch is dangerous and must be