NEFF V7446X0GB - annexe 1 Скачать руководство пользователя

Страница: 8 / 10

L
L

(

Finish in)

When you select a programme, the respective programme duration is displayed. You can delay
the start of the programme before it begins. The finish-in time indicates when the programme will
be finished. It can be set in hour increments up to a maximum of 24 h.
Press and hold the

(

Finish in

)

button until the required number of hours is shown (h=hour).

Select

Start

/Stop, the

door is locked.

(

Spin speed)

You can change the indicated spin speed. The maximum spin speed which can be selected
depends on the chosen programme. If

is selected, the load is held in the rinsing water.

(Dry)

You can activate, deactivate and set the drying function by touching this option button. Mode
of

washing and drying without interruption is auto dry only; when single drying programme

selected, you can choose auto dry, or time dry with desired drying time.

Page 8

Additional functions

See also

Programme overview

Page 7

(Prewash)

For heavily soiled laundry. Pr

ewash at

max. 30°C.

(Water Plus)

High water level to achieve better rinse result.

(Less Iron)

Special spin sequence with subsequent fluffing. Gentle final
spin – residual moisture in the laundry increased slightly.

(Intensive)

Extends the washing time for a more intensive washing
of

heavily soiled items.

Start/Stop

For starting or pausing the washing/drying programme.

Signal volume (for button signal and information signal)

Childproof lock

Programme will not be changed by accidental operation.

To activate the childproof lock:
– After the programme starts or finish in time being activated

Page 10

, press and hold the

(Finish in)

button for 5 seconds.;

– Release when the

symbol lights up. If button signal is on, an acoustic signal will be heard.

When the programme ends, the

Start/Stop

indicator remains on to remind you to deactivate

the childproof lock.

To deactivate the childproof lock:

– Touch the

(Finish in)

button until the

symbol turns off.

– Release the button.

symbol flashes if the programme has been changed while childproof lock is activated. If

the

childproof lock is deactivated while the programme selector is in a different position from when
the childproof lock was activated, the running programme will be halted.

Set to

Press and
hold

1 step
clockwise

Button signals

Information signals

Set volume*

1 step
clockwise

Set to

1. Start signal mode

2. Set volume for ...

Release

*If required, set repeatedly

1 step
clockwise

direct

Additional functions and Individual settings

Please close the door immediately because of rising water level.
In pause status

and

are displayed alternately.

Door is locked for safety reasons (water level and/or temperature are too high).
For

washing programme

: In pause status,

and

are displayed

alternately. If you need to open the door, wait for the temperature to drop or drain
the water (e.g. select

Spin

Drain

programme).

For

drying programme

: If you need to open the door, wait for the temperature to

drop or set drying programme for 15 minutes to cool down the laundry.
If

is frequently indicated when the drying programme ends:

– Clean the air inlet filter.

Installation and maintenance instructions, Page 9

– Run the

Fluff Clean

(cold) programme without laundry.

Door cannot be locked/unlocked due to high temperature of the door lock. Keep
the machine switched on for about 1 minute. Then the machine can be locked/
unlocked again.
Door cannot be opened due to the high temperature after the drying programme.
The cooling down process will continue until this display disappears and the door
can be opened.

Flashing

(no water supply):

Tap turned on?
Inlet filter blocked? Clean filter.

Installation and maintenance instructions, Page 8

Supply hose kinked or blocked?

(low water pressure):

Only information. No influence on the
programme process. The programme
duration will be prolonged.

Clean drain pump.

Installation and maintenance instructions, Page 8;

outlet pipe/drainage hose blocked.
Hold down the

(

Dry

)

button for 3 seconds to clear this display.

– Clean the air inlet filter.

Installation and maintenance instructions, Page 9

– Run the

Fluff Clean

(cold) programme without laundry.

other displays

Switch off the appliance, wait 5 seconds and switch it back on.
If the display appears again, call the customer service.

Safety instructions

– Read and follow the operating and Installation and maintenance instructions and all other

information enclosed with the washer dryer.

– Retain documents for subsequent use.

Risk of electric
shock

– Never pull out the mains plug by tugging the power cord.
– Never insert/pull out the mains plug with damp hands.

Risk of death

For worn-out appliances:
– Pull out the mains plug.
– Sever the power cord and discard together with the plug.
– Destroy the lock on the washer dryer door.

This will prevent children from locking themselves in and risking their lives.

Risk of suffocation

– Keep packaging, plastic film and packaging parts out of the reach

children.

Risk of poisioning

– Keep detergents and care products out of the reach of children.

Risk of explosion

– Items of laundry pretreated with cleaning agents containing solvents, e.g.

stain remover/cleaning solvents may lead to an explosion after being
loaded into the washer dryer.
Rinse items of laundry thoroughly by hand before.

Risk of injury

– Washer dryer door may become very hot.
– Take care when draining hot detergent solution.
– Do not climb onto the washer dryer.
– Do not lean on the open washer dryer door.
– Do not touch the drum in case it is still spinning.
– Ensure that the pump cap is screwed on while the machine is running to

prevent the escape of water and contact with moving pump parts.

– If a drying programme was interrupted, the washer dryer and the laundry

may be very hot, select

Intensive Dry

Gentle Dry

and set 15 minutes

programme to cool down the laundry, then remove the laundry.

Information on the display