NEFF V6540X2, Инструкция по эксплуатации и руководство по установке

Страница: 48 / 56

en
Faults and what to do about them
48
The fabric softener is
not completely flushed
in or too much water
remains in the com-
partment.
The fabric softener compartment insert
is not correctly attached or is blocked.
If necessary, clean the fabric sof-
tener compartment insert and fit it
correctly in compartment.
The laundry is not
dried.
The tap is turned off. Turn on the tap.
The load is too large. Reduce the load size.
The drying time is too short. Select a suitable drying time.
No display on the dis-
play panel.
Power cut The programme continues when
poweris restored. If you wish to
remove thelaundry during a power
cut, you must first Drain out the
water. Check whether:– the plug is
plugged into the socketcorrectly.–
the circuit breaker (fuse) hastripped;
if it has, call the after-salesservice
The door cannot be
opened.
Rinse hold has been selected Select the programme
p
+
0
Empty
+Spin
and press the Start/Pause
I
but-
ton.
The programme is running or the dooris
locked for safety reasons
Wait until End appears on the dis-
play panel.
Power cut. Unlock the door mechanically
Emergency release To release the door mechanically in the event of a power cut:
■
turn the programme selector to Off and unplug the mains plug from the-
socket
■
open the base panel and Drain out the water
■
pull the emergency release downwards and open the door at the same
time.
Before opening the door, make sure that there is no water or hot detergentsolu-
tion in the washer dryer.
Under no circumstances open the door with the emergency release while the-
drum is still turning.
If you cannot correct a fault yourself (switching on/off) or a repair is required:– Turn the programme selec-
tor to Off and unplug the mains plug from the socket.– Turn off the tap and call the after-sales service –>
page 24.
Fault Possible cause Remedial Action