en
Faults and what to do about them
46
Faults and what to do about them
Fault
Possible cause
Remedial Action
Programme does not
start
The Start/Pause
I
button has not
been pressed.
Press the Start/Pause
I
button.
A delayed start time has been selected.. Washer dryer starts on completion
ofthe delay period. Change the “fin-
ished in time” if necessary.
Power cut.The delayed start time that
was selected has been cleared.
Reselect the delayed start time or
startthe programme immediately.
Press the Start/Pause
I
button.
The door is not properly closed.
Close the door.
Plug not inserted properly into socket.
Insert plug correctly
The maximum spin
speed cannot be set.
The maximum spin speed depends on
the programme selected.
Change programme as required.
The water is not
Drained.
Drain hose is twisted..
Fit the Drain hose correctly.
Detergent pump is blocked.
Clean the Drain pump .
Detergent residues in
the detergent drawer.
Damp or lumpy detergent.
Clean and dry the detergent drawer .
Use the measuring aid for liquid
detergent.
Water is not flowing in.
The mains plug is not correctly plugged
in.
Plug in the mains plug correctly.
The door is not properly closed.
Close the door.
The tap is not turned on.
Turn on the tap.
The filter in the water supply hose is
blocked.
Clean the filter in the water supply
hose.
The water supply hose is pinched or
kinked.
Check the water inlet hose.
Intense vibrations dur-
ing spinning.
The washer-dryer is not correctly lev-
elled.
Level the washer-dryer .
The transport safety bolts have not been
removed.
Remove the transport safety bolts .
Washer-dryer fills with
water and continu-
ously drains it away.
Drain hose fitted too low.
Fit the Drain hose correctly.
No water can be seen
in the drum.
Not a fault.
During certain programmes the
water level is below the visible
range.
Содержание V6540X2
Страница 1: ...en Instruction Manual and Installation Instructions WASHER DRYER...
Страница 53: ...6...
Страница 54: ...6...
Страница 55: ...6...