NEFF N 70 D46ML54N0B, Инструкция по установке и эксплуатации

Страница: 17 / 20

Installation
en
17
5
Installation
Installation
Sliding the appliance up into place
1.
Slide the appliance up into place and make sure it is
positioned correctly. ¨
2.
Measure the distance between the appliance and
the wall, and mark this on the filler strip.
3.
If required, shorten the filler strip to the required
dimension.
©
Sliding out the appliance
Note:
Before you remove the appliance, protect the hob
with a piece of polystyrene from the packaging.
1.
Use a flat-blade screwdriver to push in the fastening
bolt, and turn it 90° until it locks into place.
¨
2.
Push in the fastening bolt gently with your fingers,
and turn it until it comes out of the housing along
with the spring.
©
Pull gently on the fastening bolt; before you do this,
take hold of the appliance from beneath with the
other hand.
ª
3.
Carefully remove the appliance.
4.
Screw in the filler strip fully.
5.
Push in the fastening bolt and turn it 90°.
Note:
The fastening pieces on the left and right of
the appliance must be able to move.
$ %
ƒ ƒ
&
PP
[