NEFF C87FS32 0B Series, Инструкция по эксплуатации

Страница: 34 / 60

en
Appliance door
34
3.
Open the appliance door fully.Close the two locking
levers (fig.
#
).
4.
Close the appliance door.
Removing and installing the door panels
To facilitate cleaning, you can remove the glass panels
from the appliance door.
Removing door panels from the appliance
1.
Open the door handle (fig.
!
).
2.
Open the appliance door a little.
3.
Undo and remove the screws on the left and right of
the appliance door (fig.
"
).
4.
Fold a tea towel several times and place it between
the appliance and the door before shutting the door
on the tea towel (fig.
#
).
Pull the front panel up and out towards you, and then
place it on a flat, soft surface.
Clean the panels with glass cleaner and a soft cloth.
:
Warning
Risk of injury!
■
Scratched glass in the appliance door may develop
into a crack. Do not use a glass scraper, sharp or
abrasive cleaning aids or detergents.
Risk of injury!
■
The hinges on the appliance door move when
opening and closing the door, and you may be
trapped. Keep your hands away from the hinges.
Refitting door panels on the appliance
1.
Open the door handle (fig.
!
).
2.
Insert the bottom of the front panel into the retainers
at the bottom (fig.
"
).
3.
Close the front panel until the two upper hooks are
opposite the opening (fig.
#
).
4.
Push the front panel in at the bottom until you hear it
click into place (fig.
$
).
5.
Open the appliance door a little and remove the tea
towel.
6.
Screw in the two screws on the left and right,
screwing them in a little at a time and alternating
between the two, until the front panel is centred on
the appliance door again.
7.
Close the appliance door.
8.
Close the door handle.
Caution!
Do not use the cooking compartment again until the
panels have been correctly fitted.
2 1
2
1