NEFF C67M70.0GB, Руководство пользователя

Страница: 11 / 40

11
The cooking time has elapsed
A signal sounds. Combination operation has finished. You can
stop the audible signal by pressing the à button. Switch off or
reset the appliance.
Changing the temperature or grill setting
This can be done at any time. Turn the rotary selector to
change the temperature or grill setting.
Changing the microwave power setting
Press the button for the new microwave power setting. Use the
rotary selector to set the cooking time and restart.
Opening the oven door during cooking
Operation is suspended. ƒ flashes. After closing the door,
press the ƒ button. The programme will then continue.
Pausing operation
Press the
„
button briefly.
ƒ
flashes. The oven is paused.
Press the
ƒ
button again, operation continues.
Cancelling operation
Press the „ button twice, or press and hold the „ button, and
switch off using the operating mode selector.
Note.
If you also enter an end time, the operation which you
have set will switch on and off automatically. See the section
Electronic clock .
Series of operations
You can use the SeriesOperations function to set up to three
operating modes and then start.
Requirement: you must set a cooking time for each step.
Can be used with:
■
all microwave power settings
■
combination mode
Ovenware
Always use microwave-safe, heat-resistant ovenware.
Setting a series of operations
Requirement: the operating mode selector must not be pushed
in.
1.
Press the
°±²
button.
The
°
for the first operation in the series lights up.
2.
Set the first microwave power setting and cooking time.
3.
Press the
°±²
button again.
The
±
for the second operation in the series lights up.
4.
Set the second microwave power setting and cooking time.
5.
Press the
°±²
button again.
The
²
lights up for the third operation in the series.
6.
Set the third microwave power setting and cooking time.
7.
Press the ƒ button.
Appliance operation begins. The clock display shows the
cooking time of the first operation in the series. The ° for the
first operation in the series lights up.
Checking the total or remaining cooking time
Press the clock function button
Ã
twice to display the
remaining cooking time.
The cooking time has elapsed
A signal sounds. The series of operations is finished. To stop
the signal, press the
„
button. Switch off or reset the
appliance.
Opening the oven door during cooking
Operation is suspended. ƒ flashes. After closing the door,
press the ƒ button. The programme will then continue.
Changing the setting
Changes can only be made before operation begins. Press
the °±² button to go to the desired setting, and make the
changes.
Note.
You can also combine an operating mode with the
SeriesOperations function. First, set the oven operating mode.
Memory
Memory gives you the option to store your own settings and
call them up again at the press of a button. There are six
memory locations available. The memory function is useful for
recipes which you prepare particularly frequently.
In this section, you can read about
■
how to save the memory
■
how to start the memory
Saving settings in the memory
Requirement: the operating mode selector must not be pushed
in.
1.
Set the operating mode, temperature and cooking time for
the meal you wish to cook or select a programme. Do not
start.
2.
Press the l button.
“Memory 1 ­ free” appears.
3.
Using the operating mode selector, select one of the six
memory locations.
4.
Press and hold the
l
button, a signal sounds and “Memory
saved” appears.
Starting the memory
You can start cooking at any time using the settings saved for
your meal.
Requirement: the operating mode selector must not be pushed
in.
Place your food in the cooking compartment.
1.
Press and release the l button and use the rotary selector
to select the memory location.
The stored settings are displayed. If “Memory location empty”
appears, no setting has been saved in this memory location
yet.
2.
Press the ƒ button.